Water Proof Solid Embossed UV-Resistant Capped WPC Board Composite Decking Hot Sale China WPC Composite Decking for Outdoor Floor Terrace

Basic Info

Model NO.	KG038
Surface	Flat or Embossing
Size	200*20mm
Length	2.2m/2.9m/3m/4m or as Your Requirement
Material	Wood Fiber+HDPE+Additives
Feature	Anti-Slip,Anti-UV,Waterproof,Crack Resistance Ect
Application	Outdoor
Certificate	ISO9001 /Intertek /TUV /ISO14001 / CE
Technic	Wood Plastic Composite
Delivery Time	15-20 Days After We Received The Deposit
Transport Package	Covered Tightly with Pallet or Bundles
Specification	200*20mm
Trademark	All countries
Origin	Zhejiang, China
Production Capacity	15000 Tons Per Years

Product Description

Kelai traditional wpc composite decking is made of 60% wood fiber,30%HDPE and 10% additives.These all material of wpc decking are very friendly.And the wpc decking is anti-slip,anti-uv,crack resistant,anti-corrosion,anti-deformation,heat resistant and anti-mite.However the important thing is that the wpc decking doesn't need any maintenance

Surface of wpc decking:One side is small stripe,the other side is flat.

 

Type	Solid WPC decking
Technic	Wood Plastic Composite
Size	200*20mm
Length	2.2m/2.9m/3m/4m/as your requirement
Model	KG038
Delivery Time	15-20 days after we received the deposit
Certification	ISO9001/Intertek/TUV/CE/ISO14001
Application	Garden,Lawn,Balcony,Pool&SPASurrounds,Corridor,PlaygroundBoardwalk,Garage

Feature
1.Our wpc composite decking With high density,high strength and good looking2.Our wpc composite decking is non absorbent,effectively prevent the decay and damage3.Our wpc composite decking advocates environmental protection,back to nature4.Our wpc composite decking creates beautiful and comfortable land5.Our wpc composite decking is anti-corrosion,anti-crack,anti-deformation6.Our wpc composite decking is easy to install and clean

Storage and Maintenance
1.Pls don't arbitrarily stack when discharge WPC materials.2.Because of the possibility of deformation,so Pls don't verticall discharge, and plslevel on the ground when storage WPC decking.3.Place on the plane, should prevent the rain, pls use the protective material to cover.In order to get better supporting effect, pls support to the edge when transport wpc decking.4.When put composite decking on the hard ground, there should have suitable material to underlay atthe bottom, pls pay attention to the cutting ends and don't have impact phenomenon.5.Don't have a hammer and other hard things fall impact,all these may cause WPC decking damaged.6.When move WPC decking material, we should avoid mutual sliding friction. Move out from the whole stack,and should lift,then place.7.When install WPC decking, Pls don't let tools, screws or tools equipment sliding on the decking surface.8.Avoid wpc decking touch with the building waste.9.After the scrape, wpc chip contain resin component , so we shouldn't treat it asburning garbage disposal, pls deliver the debris and other waste materials to factory for recycle, not only it can protect our earth, but it also realize wpc material recycling.

Shipping and Packing
Packing:Covered wpc decking tightly with pallet or bundles or as your requirement

FAQQ: What is the species of wood fiber you use?
A: Eucalyptus, poplar and some mixed wood, which is color related.

Q: What about your main market?
A: The main market is always oversea. More than 90% of the products are for export, and main market is Greece, Czech Republic,Italy,Germany, Spain, Austria, Swiss, Estonia, Norway, UK, Korea, Thailand, Indonesia, Vietnam, USA, Canada, Argentina,Australia,etc.

Q: Do your WPC products have color fading problem?
A: To be honest, the products do have some color fading problem mostly during the first 6 months after installation, but not obvious.

Q: How many production lines you have? What about the production capacity per month?
A: 14 extrusions lines. 30-35 containers per month.

Q: What properties will you test for your raw material and end products?
A: Wood fiber: ash content, fiber size, water content.HDPE: melting index, ash content, physical property test for finish productEnd product: melting index, ash content, physical property test for finish productEnd product: strength test, boiling test and expansion rate test, temperature cycle test, outdoor UV test

Q: What about delivery time for one container?
A: 15-20 days upon deposit payment well received.

Q:What about the temperature range of your WPC can be used?
A: -40 to 60 degrees.

Q: Have you ever received any complaints from your customers?
A: Frankly speaking, yes. And it's mainly about color difference, cause our raw material is recycled material, there is always difference between different lots. Now mixing is done for our HDPE plastic and also after pelletizing to well control of this problem.